產品列表 / products
調壓閥AP71S MV4-FV6-FV4 FV4原裝供應
APTECH調壓閥是通過調節，將進口壓力減至某一需要的出口壓力，并依靠介質本身的能量，使出口壓力自動保持穩定的閥門。從流體力學的觀點看，減壓閥是一個局部阻力可以變化的節流元件，即通過改變節流面積，使流速及流體的動能改變，造成不同的壓力損失，從而達到減壓的目的。然后依靠控制與調節系統的調節，使閥后壓力的波動與彈簧力相平衡，使閥后壓力在一定的誤差范圍內保持恒定。
APTECH調壓閥AP64系列產品介紹
• True Springless Design,free of springs or poppets
• SS 316L VAR secondary remelt material
• 3,500 psig rated (241 bar)
• Low cracking pressure
• Reseals with minimal back pressure
• 15, 10 or 5 µin. Ra max electropolished finishwith proper surface chemistry
• DI cleaned and baked dry
• Manufactured to meet UHP requirements
• 真正的無彈簧設計，無彈簧或提升閥
• SS 316L VAR 二次重熔材料
• 3,500 psig 額定值 (241 bar)
• 低開啟壓力
• 以最小的背壓重新密封
• 15、10 或 5 µin。 Ra max 電解拋光表面具有適當?shù)谋砻婊瘜W(xué)
• DI 清洗并烘干
• 為滿足 UHP 要求而制造
AZ1010SHP2PWFV4FV4
AP1410TS2PWFV4FV4
AP1510S4PWFV4FV400109
AP1510S4PWFV4IV440HVS
AZ1010S2PWFV4FV4
AZ1315S2PWFV8FV8
AZ1315S2PWFV12FV12
AP4550S2PWFV4FV4ISC
AP1410TSH4PWFV4FV400
AP3130SM2PWMV8MV8
AP3100SM2PWFV8FV8
AP71S-MV4-FV6-FV4
AP71S MV4-FV6-FV4 FV4
AP71S MV4 MV4 MV4
AP1710SM-3PW-MV4-MV4-IV4
AP1710SHM2PWFV4FV4109
AP1710S 2PM FV4 P
AP1710S 2PW FV4 FV4
